ShowRecorder

How to multitrack record an Allen & Heath Qu

Last checked

Short answer. Allen & Heath staff say yes: iOS sees a Qu as a class-compliant multichannel device, so a Qu-16 can multitrack record to an iPad over USB with a multichannel recording app. We haven't tested it yet. The Qu-16 sends 24 channels at 48 kHz. The Qu-24, Qu-32, Qu-SB and Qu-Pac send 32 at 48 kHz, and the new Qu-5, Qu-6, Qu-7 and Qu-3 send 32 at 48 or 96 kHz once USB Stream Mode is set to Multitrack. Allen & Heath doesn't name the iPad or iPhone.

Quick start

  1. Know which Qu you have. The Qu-5, Qu-6, Qu-7 and Qu-3 (the new Qu) have a USB-C port. The Qu-16, Qu-24, Qu-32, Qu-SB and Qu-Pac (Qu Classic) have a USB-B port. (Ways to record)
  2. New Qu: set USB Stream Mode to Multitrack in SETUP > Audio > Sync & USB, and pick 48 or 96 kHz there. A Qu Classic runs at 48 kHz, and there is no stream mode to set. (Recording settings)
  3. Patch the USB outputs. New Qu: I/O > Outputs > USB. Qu Classic: Setup > I/O Patch > USB Audio. (USB routing)
  4. Plug the Qu into the computer, iPad or iPhone and open a multichannel recording app. For a long show on a phone or tablet, add a powered USB-C hub. (Mac, iPad and iPhone)
  5. Record a 30 s test and play it back before the show.
  6. Seeing only 2 tracks? (Only 2 channels?)

Check which Qu you have first. The Qu comes in two generations, and they record differently:

  • The new Qu: Qu-5, Qu-6 and Qu-7, the Qu-3, and the D models. It runs at 96 kHz. It has a USB-C audio interface. It records multitrack (one track per channel) to an SD card.
  • Qu Classic: Qu-16, Qu-24, Qu-32, Qu-SB and Qu-Pac, the original 48 kHz models. It has a USB-B audio interface. It records multitrack to a USB drive (Qu-Drive).

Each section below covers both. Facts come from Allen & Heath's support articles and product pages unless a line says otherwise. The sources are at the end. Other mixers are in the mixer recording guides. Words you may not know are in the glossary.

Ways to record a Qu

To a computer over USB

Plug the Qu's USB audio port into the computer. Then record in any DAW (a recording app for computers, such as Reaper or Logic).

New Qu (Qu-5, Qu-6, Qu-7, Qu-3):

  • Channels: 32 in and 32 out over USB-C, at 48 or 96 kHz. Allen & Heath: "Multitrack mode provides all 32 input and 32 output sockets."
  • Bit depth: Allen & Heath lists 16 or 24-bit. Which one your app gets is not confirmed.
  • Connector: USB-C, USB 2.0, class compliant (works with no driver) for audio and MIDI.
  • The other USB port: the separate USB-A port is for stereo recording and data.
  • Mac: no driver needed: "Core Audio compliant so no driver is required."
  • Windows: install Allen & Heath's ASIO/WDM driver. All 32 channels need ASIO.
  • USB 3.0 ports: Allen & Heath warns that some USB 3.0 (xHCI) ports fail with USB audio. Try another port if the audio drops out.

Qu Classic (Qu-16, Qu-24, Qu-32, Qu-SB, Qu-Pac):

  • Channels to the computer:
    • The Qu-16 records "up to 24 tracks to your Mac or PC".
    • The Qu-24, Qu-32 and Qu-Pac send up to 32.
    • The Qu-SB and Qu-Pac guides list "32 in, 32 out USB streaming".
  • Sample rate: 48 kHz.
  • Bit depth: the USB bit depth is not confirmed.
  • Connector: USB-B, high speed USB 2.0.
  • Mac: class compliant, no driver.
  • Windows: install Allen & Heath's driver.

With no computer

New Qu: multitrack to an SD card.

  • Tracks: up to 16 channels at 96 kHz, or 32 at 48 kHz.
  • Files: one mono 24-bit WAV file per channel.
  • Card: use an SDHC card up to 32 GB, UHS-I, class 10.
  • Where the files go: AH_QU\USBMTK\, in a folder per recording. Each file is named after the channel, for example 03SnrTop.WAV.
  • How long: a file stops at 4 GB. That is about 4 hours at 96 kHz, or 8 hours at 48 kHz.
  • What records: only patched USB outputs. At 96 kHz, only the first 16 patched ones.

New Qu: stereo to a USB stick. The USB-A port records stereo instead.

  • It writes a 24-bit WAV of USB outputs 1 and 2, in AH_QU\USBREC.
  • It runs up to 2 hours at 96 kHz or 4 hours at 48 kHz.
  • Use a FAT32 stick.
  • USB-A and SD can't record or play at the same time.

Qu Classic: Qu-Drive to a USB drive.

  • Tracks: 18 tracks, 48 kHz 24-bit WAV: 16 mono tracks plus a stereo pair you choose. It can also record stereo.
  • What records: the multitrack takes USB sends 1-18. The stereo recording takes sends 17 and 18.
  • Drive: use a FAT32 drive from 2 GB to 2 TB, and format it on the Qu. Allen & Heath says most USB sticks are too slow.
  • How long: a file stops at 4 GB, about 8 hours per track.
  • At the same time: Qu-Drive can record while the Qu also streams multitrack to a computer over USB-B.

To an iPhone, iPad or Mac with an app

  • A Mac works like any computer above.
  • New Qu: Allen & Heath says it can work with tablets and phones, but it isn't officially supported.
  • Qu Classic: Allen & Heath staff say iOS sees it as class compliant.
  • Neither names the iPad or iPhone, and we haven't tested one yet.

The details are in Mac, iPad and iPhone below.

Qu recording settings

New Qu:

  1. Open SETUP > Audio > Sync & USB.
  2. Set USB Stream Mode to Multitrack to record every channel.
  3. Set USB Sample Rate to 96 or 48 kHz.

What each setting does:

  • USB Stream Mode: Stereo or Multitrack. Stereo sends only USB 1 and 2, "for compatibility with tablets and phones". Multitrack sends all 32 in and 32 out.
  • USB Sample Rate: 96 or 48 kHz. One setting covers USB-C, the USB-A stick and the SD card. The Qu always runs at 96 kHz inside. At 48 kHz it converts the sample rate.
  • Audio Clock Source: Internal or SLink, plus Dante on the D models.
  • Bit depth: 16 or 24-bit over USB-C, per the spec list. Whether you can set it on the mixer is not confirmed. SD and USB-A recordings are 24-bit.
  • File format: SD and USB-A recordings are WAV. Over USB, your recording app sets the format.
  • Formatting the card or stick: UTILITY > USB Utility, Status and Format.
  • The recorder screens: under UTILITIES > Qu Drive, Stereo and Multitrack.
  • Playback: only recordings made at the current sample rate play back.

Qu Classic:

  • Sample rate: fixed at 48 kHz. Clock source options are not confirmed.
  • What USB sends from each channel: Setup > I/O Patch > USB Audio. Switch between Insert Send and Direct Outs, then press Apply (see Tap points).
  • Global USB Source: Qu-Drive or USB B Streaming. It picks where the USB returns (tracks played back into the mixer) come from when channels play back.

Only 2 channels? Set USB Stream Mode to Multitrack

New Qu: with USB Stream Mode on Stereo, the Qu sends only USB 1 and 2. So an iPad or iPhone sees 2 channels.

  1. Open SETUP > Audio > Sync & USB.
  2. Set USB Stream Mode to Multitrack.
  3. Check the recorder again.

Qu Classic: there is no stream mode. Use a multichannel recording app. Allen & Heath staff say a stereo app may see only two channels, and on iOS often uses just the first two.

Qu USB routing

New Qu: I/O > Outputs > USB

Allen & Heath: "There are 32 USB output sockets available to patch to. These feed the USB-C connection to a computer or device, as well as the USB-A and SD Card for Qu Drive recording."

  1. Go to I/O > Outputs > USB.
  2. Pick a USB output socket and choose its source from the pop-up. A source can be any core output, including the input direct outs, the mix outputs and the FX returns. One source can feed several sockets.
  3. To patch many at once, open Quick Patch (the three-line menu, top right). +1 patches the next socket with the next source in order.

Out of the box, USB outputs 1 and 2 carry the Main LR mix. What sockets 3-32 carry out of the box is not confirmed. So patch them yourself and listen to a short test.

Which sockets each recorder uses:

  • USB-C, Stereo mode: 1-2.
  • USB-C, Multitrack mode: 1-32.
  • USB-A stick: 1-2.
  • SD card at 48 kHz: up to 32, patched sockets only.
  • SD card at 96 kHz: up to 16, the first 16 patched.

Qu Classic: Setup > I/O Patch > USB Audio

  1. Go to Setup > I/O Patch > USB Audio (also in the Qu-Pad app).
  2. Highlight a USB send and turn the rotary to pick its source. Fn (+1) moves on to the next channel.
  3. Press Apply.

Any Qu output can feed a send: an input channel (at its Insert Send or Direct Out), a mix, the Main LR and so on. The factory patch suits "the most common configuration". For example, the Main LR is on sends 17 and 18 for a Qu-Drive stereo recording.

USB returns are fixed: each return feeds one input channel, 1-to-1, and can't be re-patched. To play tracks back in a different order, reorder them in your app.

Qu playback for virtual soundcheck

Virtual soundcheck means playing a recording back through the mixer's channels, so you can set the mix with no band on stage.

New Qu:

  • Set the source: set a channel's source to a USB socket in I/O > Inputs, or in PROCESSING > Source.
  • Keep two patches: the Input Channel Patch Library (the LIBRARY key on I/O > Inputs) stores and recalls the whole input patch. So you can keep one patch for the live inputs and one for USB playback.
  • Stereo USB channel: the dedicated stereo USB channel always takes USB inputs 1 and 2.
  • From the SD card: SD multitrack playback comes back on the same USB socket numbers it was recorded from.

Qu Classic:

  1. Set each channel's source to USB.
  2. Set the Global USB Source to USB B Streaming (or to Qu-Drive to play from the drive).

Where the returns land (1-to-1):

  • Qu-32, Qu-SB and Qu-Pac: all 32 returns go to the 32 mono channels.
  • Qu-24: the stereo channels take USB 25-30.
  • Qu-16: USB 17 and 18 feed ST1.

Good to know:

  • Qu-Drive plays back 18 mono 48 kHz 24-bit WAV files.
  • Qu-Drive playback while recording multitrack to the computer works.
  • Computer playback while Qu-Drive records also works.
  • Qu-Drive playback and computer playback together don't.

Qu tap points

The tap point is where in the channel the recording is taken: the raw input, or later, after the EQ or the fader. Which one to pick, and why, is in Pre or post fader. On the Qu:

  • Which to pick on a Qu Classic: leave each channel on Insert Send, the factory default. It is taken directly after the preamp, with no channel processing. Allen & Heath: "Live show multitrack recording typically uses the channel Insert Sends so that live mixing does not affect the recording."
  • Which to pick on a new Qu: patch the input direct outs to USB. Then set ROUTING > Direct Out (on an input channel) > Global Direct Out Settings > Source to the point you want.
    • An earlier point keeps more of the channel's processing out of the recording. Allen & Heath: "each source point includes all preceding processing".
    • Its article doesn't list the point names, so check what your Qu offers.
  • New Qu direct out switches: each direct out has its own Level. Global switches set whether the direct outs follow the mute, the fader, DCA mutes, DCA faders and mute groups. For a multitrack you'll remix, leave them off so mutes and fader moves stay out of the recording (our reading of the switch names).
  • No other new Qu tap is confirmed: we found no tie line or insert send tap for USB in Allen & Heath's new Qu articles.
  • Qu Classic Direct Outs: switching USB to Direct Outs uses one global source point for every channel.
    • The points: Post Preamp, Post Insert, Post EQ, Post Comp or Post Delay.
    • There are options to follow the fader and mute.
    • Each channel has a Direct Out Trim (Routing, then Sel on an input).
  • Gain and trim (new Qu):
    • Gain is the analog preamp.
    • Trim is digital, plus or minus 24 dB, in PROCESSING > Input.
    • Preamp controls belong to the socket. So a socket patched to two channels shares one gain.
  • HPF (high-pass filter): Allen & Heath's list for a different setting (the PAFL source point) shows the trim comes before the HPF in a new Qu channel. Where the HPF sits relative to each direct out point is not confirmed.
  • Gain changes reach the recording: the Insert Send and post-preamp taps follow any change to the analog gain (our reading of "directly after the preamp"). Whether the Qu compensates for a shared stage box's gain is not confirmed for either generation.

Qu on Mac, iPad and iPhone

  • Mac: works with no driver on both generations.
  • iPad and iPhone, new Qu: set USB Stream Mode to Multitrack, or the device sees only 2 channels. Allen & Heath: "It is possible to connect the Qu as an Audio/MIDI interface to any device which supports Class Compliant devices, including tablets and phones, though it is not possible for all devices to be tested and officially supported."
  • iPad and iPhone, Qu Classic: use a multichannel recording app. An Allen & Heath staff member on its forum: "on macOS and iOS the Qu is class compliant so with multichannel apps it will be seen as a multichannel device, but with stereo apps, you may only see two channels".
  • Not named, not tested: neither source names the iPad or the iPhone, and we haven't tested either with a Qu yet.
  • Cable: the new Qu has a USB-C port. The Qu Classic has a USB-B port. We'd use a USB-C to USB-B cable from a USB-C iPad or iPhone (our advice, not Allen & Heath's).
  • Power: Allen & Heath doesn't say whether a Qu charges a phone or tablet. For a long show, use a powered USB-C hub, or a camera adapter that passes power through.

ShowRecorder (the app this site makes) records every USB Channel from any class-compliant mixer, so it should record a Qu over USB, but nobody has tested it on a Qu yet. It has no Mixer Link for Allen & Heath. Mixer Link (channel names and colors) works only on the XR18/MR18 and X32/M32. If you record a Qu with it, we'd like to hear how it goes.

Download on the App Store

Runs on a USB-C iPhone (iPhone 15 or later) on iOS 26, or a USB-C iPad on iPadOS 26. Mac: join the TestFlight beta.

Your mixer not listed, or not tested? Ask us

Sources

Allen & Heath, new Qu:

Allen & Heath, Qu Classic:

Allen & Heath staff on its forum:

Frequently asked questions

Can I multitrack record a Qu-16 to an iPad?

Allen & Heath staff say yes: iOS sees a Qu as a class-compliant multichannel device, so a multichannel recording app sees its channels (a stereo app may see only the first two). We haven't tested it yet, and Allen & Heath doesn't name the iPad. The Qu-16 sends 24 channels over USB at 48 kHz; the Qu-24, Qu-32, Qu-SB and Qu-Pac send 32. The new Qu-5, Qu-6, Qu-7 and Qu-3 send 32 at 48 or 96 kHz with USB Stream Mode set to Multitrack.

Can a Qu multitrack record without a computer?

Yes. The new Qu records up to 16 channels at 96 kHz or 32 at 48 kHz to an SDHC card (up to 32 GB), one 24-bit WAV per channel. A Qu Classic records 18 tracks (16 mono plus a stereo pair), 48 kHz 24-bit WAV, to a USB drive with Qu-Drive; Allen & Heath says most USB sticks are too slow.

Why does my app see only 2 channels from a Qu?

On a new Qu, USB Stream Mode is probably on Stereo, which sends only USB 1 and 2. Set it to Multitrack in SETUP > Audio > Sync & USB. A Qu Classic has no stream mode, but a stereo app may see only the first two channels; use a multichannel recording app.

Does a Qu need a driver?

Not on a Mac: both generations work there with no driver. On Windows, install Allen & Heath's driver; on a new Qu, all 32 channels need ASIO.

Is a Qu's USB recording pre or post fader?

On a Qu Classic, USB takes each channel's Insert Send by default: directly after the preamp, with no channel processing. You can switch it to Direct Outs with one global source point. On a new Qu, patch the input direct outs to USB; they include all processing before the Direct Out Source point you pick.